[andrew]

i rebuilt a 78 bahama ski boat. replaced ply in transom I was real careful to drill the mountong bolts exactly where they were at higher rpm and at speed the left side of boat is about 3 in. higher and the boat pulls to the left I'm replacing steering which is really stiff. the outdrive has dolfins for planing and the skeg is broke a little off the bottom any idea why? thanks for reading
_________________
i am rebuilding a 78 bahama boat that had rotten transom replaced plywood and now i am putting it all back together plan to replace floor next will get new seats and other misc.

[MikeW]

Hello, hard to say what is causing the problem without seeing the boat. You may have to resort to installing trim tabs to remedy the problem.